Crosby G-2140 Alloy Anchor Shackle

G-2140 Alloy Anchor Shackle

Quenched and Tempered.
Alloy bows, Alloy bolts.
Forged Alloy Steel 30 thru 175 metric tons. Cast Alloy Steel 200 thru 400 metric tons.
Working Load Limit is permanently shown on every shackle.
Pins are galvanized and painted red.
All sizes are RFID EQUIPPED.
Shackles are Quenched and Tempered and can meet DNV impact requirements of 42 joules (31 ft-lbs.) at -20 degree C (-4 degree F).
All sizes are individually proof tested to 2.0 times the Working Load Limit.
Refer to page 76 for Crosby COLD TUFF® shackles that meet the additional requirements of DNV rules for certification of lifting applications - Loose Gear.
Shackles 200 metric tons and larger are provided as follows.
Serialized Pin and Bow
Material Certification (Chemical)
Magnetic Particle Inspected.
Certification must be requested at time of order.
Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide for Certification of Cranes.
Look for the Red Pin® . . . the mark of genuine Crosby quality.

Spec Sheet